Fuel Transfer Pump

Dispense gasoline, kerosene and diesel out in the field.
  • For fueling skid loaders, tractors and jobsite vehicles.
  • 12' dispensing hose.
  • Aluminum die cast, explosion-proof motor.
  • 15' cable connects to standard 12-volt battery.
  • Padlockable. See our full line of padlocks.
UL/C-UL Listed
MODEL
NO.
FITS
CONTAINER
FLOW RATE REACH BELOW
DRUM LID
FITS
NECK SIZE
WT.
(LBS.)
PRICE
EACH
ADD TO
CART
H-7193 15 - 55 Gal. 15 gal./min. 32" 2" 32 $399 ADD
DIMENSIONS:
  • Overall: 39 1/2 x 12 1/2" (H x W)
  • Nozzle:
    • Length: 6 1/4"
    • Opening:
      • Inside: 5/8"
      • Outside: 3/4"
  • Suction Tube: 34"
  • Anti-static Hose: 3/4"
  • Reach Below Drum Lid: 15" or 32"
  • Padlock Opening: 3/8"

MATERIAL:
  • Pump Chamber: Die cast aluminum
  • Suction Tube: Steel
  • Elbow Fitting: Cast iron
  • Fuel Nozzle: Nylon
  • Hose/Seals: NBR (Nitrile Rubber)
  • Hose End Fittings: Zinc
  • Seals: Viton
  • Base of Suction Tube: Polypropylene

TEMPERATURE:
  • Maximum: 419 F

COMPATIBILITY:
  • Also compatible with E15 and Bio Diesel.
  • Not for use with solvents.
  • Drum Openings:
    • Compatible: 2" Fine or NPS threaded openings
    • Not compatible: Coarse or Buttress threaded openings unless used with a Buttress to Fine thread adapter. (H-3864-CTA)

USAGE:
  • Drum should be vented while in use.
  • Do not run pump dry.
  • Leave 2" gap from bottom of tank/drum and suction tube, for best results.
  • Maximum Continuous Operation Time: 30 minutes on/30 minutes off
  • Turn pump off when not in use.

SPECIFICATIONS:
  • 1,700 rpm
  • Max Viscosity: 33 cps
  • NEC Temperature Code: T2D
  • Not FDA compliant


SPECIFICATIONSMETRICIMPERIAL
H-7193 -
img You exceeded the maximum number of times an email can be sent. Try again later.
 • Required
img  •
img  •
img  •
img  •
(use "," to send to multiple recipients)
 
 
06/25/2018 11:04:02 AM; USWEB8 -0-0/0.0-1